Nails Art Design Biography
(Source google.com)
Nail polish, or nail varnish, is a lacquer applied
to human fingernails or toenails to decorate and/or protect the nail. Today’s
nail polishes are usually nitrocellulose in a solventsuch as butyl acetate or
ethyl acetate. They may be clear or coloured with pigments. The coating has a
plasticizers (e.g. camphor). This links polymer chains, spacing them to make
the film flexible after drying. That way it resists cracking or flaking caused
by the natural movement of the nail. Nail polish was used in the ancient world.
In China
it started off being made from a combination of beeswax, egg whites, gelatin,
vegetable dyes, and gum arabic and rose petals. The Chinese would dip their
hands in this mixture until their finger nails turned red or pink. In Ancient
Egypt henna was used. The enna stained their fingernails orange, which turned
dark red or brown after the stain matured. In 1300 BC, the colour of the nail
polish reflected social rank. The colours gold and silver were favoured; later,
black and red were the favoured colours. Red is the colour Cleopatra wore. By
the turn of the 9th century, nails were tinted with scented red oils, and
polished or buffed with a chamois cloth, rather than simply polished. In the
19th and early 20th centuries, people pursued a polished rather than painted
look by massaging tinted powders and creams into their nails, then buffing them
shiny. After the creation of automobile paint, Cutex produced the first modern
nail polish in 1917. Synthetic nail polish was introduced in the 1920s in Paris. The artificial
nails are not a replacement, but an extension for natural nails. There are two
main approaches to creating artificial nails–tips and forms. Nail art is a
creative activity that draws pictures or designs fingernails. It a type of art.
These days fingernails and toenails are seen by some as important points of
beauty. Also, it is a type of fashion activity, related to manicuring. There are
commercial shops ('nail bars') where nails are worked on to make them
attractive. The main product is acrylicnails with ready-made designs which can
be stuck on top of natural nails. Tips are made of lightweight plastic plates
that are nail-shaped. They are glued on the end of the natural nail and liquid
acrylic is then applied over the entire nail.
Forms are fitted over the nail. Then an artificial nail is molded out of acrylic. Then the form is removed and the new nail shaped and buffed to a shine. This is a mixture of a powder and a liquid. The mixture starts to harden in 30–40 seconds after application and gets to its final hardness in fifteen minutes. Powder and liquid acrylics can be removed by using a variety of solvents (usually acetone is used). Usually it takes 15 to 20 minutes to remove the nail. Another material, commonly called "UV Top Coat" (in correct terms a polymer resin), hardens under ultraviolet light. These can show a wider range of properties (flexibility, strength, etc.) but may be more expensive. They cannot be removed by organic solvents, but only by filing (or left to grow out with the natural nail). Another popular alternative to acrylic or gel preparations are fiberglass or silk wraps. They are done by cutting pieces of actual fiberglass or silk fabric to fit on the surface of the nail or tip and then it is sealed down with a resin or glue. These are an alternative for those who are allergic to chemicals used in the acrylic or gel process. Other materials can be used, as well as combinations of them. There are also temporary, cheaper flexible tips that can be quickly glued at home without help from a professional. Acrylic nail powders are available in a variety of colours and can use "special effects" such as contours, sparkles and the very popular French manicure (pink and white appearance).
Forms are fitted over the nail. Then an artificial nail is molded out of acrylic. Then the form is removed and the new nail shaped and buffed to a shine. This is a mixture of a powder and a liquid. The mixture starts to harden in 30–40 seconds after application and gets to its final hardness in fifteen minutes. Powder and liquid acrylics can be removed by using a variety of solvents (usually acetone is used). Usually it takes 15 to 20 minutes to remove the nail. Another material, commonly called "UV Top Coat" (in correct terms a polymer resin), hardens under ultraviolet light. These can show a wider range of properties (flexibility, strength, etc.) but may be more expensive. They cannot be removed by organic solvents, but only by filing (or left to grow out with the natural nail). Another popular alternative to acrylic or gel preparations are fiberglass or silk wraps. They are done by cutting pieces of actual fiberglass or silk fabric to fit on the surface of the nail or tip and then it is sealed down with a resin or glue. These are an alternative for those who are allergic to chemicals used in the acrylic or gel process. Other materials can be used, as well as combinations of them. There are also temporary, cheaper flexible tips that can be quickly glued at home without help from a professional. Acrylic nail powders are available in a variety of colours and can use "special effects" such as contours, sparkles and the very popular French manicure (pink and white appearance).
No comments:
Post a Comment